SPECIFICATION

SPRING LOADED PISTON TYPE WITH RUBBER DISC SCREWED FEMALE ENDS.MAXIMUM WORKING TEMPERATURE 70°C.

Maximum Inlet Pressure        15 Bar
Outlet Pressure                     0.5 - 4 Bar
Size                                       3/8" (10mm)-2" (50mm)

LEADER water application Pressure Reducing valve will maintain a satisfactory reduced pressure under most operating conditions and it has a wide application in process work where regulation is required.

Operation

Fluid entering the valve through the inlet, establishes an equilibrium between the piston & the seat portion & then escapes through the outlet. The escaped fluid at the outlet enters the piston chamber.

When the reduced pressure attains force more than the spring force, it starts compressing the spring downward. It gives pressure reduction at the outlet by closing the disc from the higher inlet pressure.

An adjusting screw is turned clockwise to increase and anticlockwise to decrease the outlet pressure.

Data Required While Ordering

Inlet Pressure, Outlet Pressure, Media, Temperature of the media, End Connection & other facts surrounding the installation which are pertinent thereto.